Guidelines for Hardware Setup of a Canon Printer for the First Time
Although the installation method and download through http://ij.start.cannon may vary, the setup process for every Canon model is essentially the same. Let's begin by setting up your Canon printer model setup-
- The first step is to take out the Canon printer model from the box after removing the box covering.
- Take remove all of the tape, plastic, and other packing materials since the model hardware is packaged in plastic.
- Make sure the surface is clean and close to the computer or laptop before setting up the printer there.
- With your inkjet printer, examine the components that were shipped. For instance, a setup CD for Mac and Windows, a power cord, cartridges, and a manual.
- Connect one end of the power line to the printer's power supply.
- To begin the setup, take the power cable and attach one end to the printer's power cord at the back and the other end to the power switch.
- In order to turn on your printer, press the ON button.
- If a steady light appears, remove the Paper Output Tray and close it.
- Slide the paper guide after installing the Fine and Ink cartridges.
- Place acceptable blank papers there, and make sure everything is set up properly.
- Canon's Setup printer model. To continue, you must now visit https://ij.start.cannon and download the most recent printer driver.
Connecting Canon IJ Printer to WiFi
The best way to connect your computer and Canon printer is via WiFi or a wireless connection. Your printer should, however, be a wireless model for this procedure. Therefore, let's examine how to link the WiFi to the IJ printer.
Step 1: Make sure your Canon printer is turned on.
Step 2: Download and install the printer drivers from ij.start.canon.
Step 3: Press the ON button on your Canon model to turn it on.
Step 4: Select the WiFi or wifi symbol by tapping or pressing it.
Step 5: At this point, ensure sure your wireless router is operational. The WiFi lamp should flash.
Step 6: After that, briefly press the WPS button on the wireless router.
Step 7: Your printer might display a connected status message. If not, check the status of the WiFi and ON lights; if stable, a successful connection has been achieved.
Comments
Post a Comment